Bette Baths - Luxury Steel and Enamel Baths

Bette is a German company established back in 1952 and now one of the leading manufacturers of high quality enamel and steel bath in Europe.

If you are fitting a bath with panels in your bathroom, you may find that it’s hard to find the quality of look and feel that you want out of the materials that most of these baths are made of. If that’s the case and you want to find something just a bit better than the run of the mill baths then Bette steel and enamel baths are something you should consider.

Bette Steel and Enamel baths are made from 2.5mm thick titanium steel (1.6mm gauge also available on selected Bette Form models) with a fine and highly durable vitreous enamel permanently bonded to its inner surface. Bette use a firing process that reaches temperatures of 850C to create a very thin and even enamel surface free from flaws. This fine quality gives a tough surface with a high impact strength meaning you’ll get years of chip free and scratch free use from your bath. The enamel surface will not stain from use or discolour with sunlight as can happen with stone cast resin and will not react to organic chemicals and solvents like acrylic.

Bette baths can be supplied with or without tap holes, with optional grips and in about 1000 different colours. Bette Baths have a huge selection of baths and many modes are available in up to 12 different sizes. All Bette baths come with a manufacturers 30 year guarantee.

In use the steel in a Bette bath helps to warm the entire bath so even areas above the water line become warm and comfortable to the touch.

All the materials in Bette baths are entirely natural being made from steel and vitreous enamel (glass) only. Although a Betty bath will last virtually forever these materials are biodegradable and recyclable.

In addition to the standard range of Bette baths the Bette comfort baths come with a complete set of panels and demountable plinth for allowing access to the waste. Ideal for a simple installation. Bette comfort bath panels are made from the same high quality steel and enamel as are the bette baths and are welded permanently onto the bath.